Juki LU-1508NH 1-Needle,Unison-Feed, Lockstitch Machine with Vertical-axis Large Hook for Extra Heavy-weight Materials,Head Only! Features: The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needle bar stroke of 38mm and long 190R needle,the machine supports the sewing of extra heavy materials. The machine comes with an extra large steel hand-wheel with a diameter as large as φ175. Single Needle Unison Feed Needle Feed And Walking Foot 2500 Stitches Per Minute New Rectangular Feed Prevents Gathering Handles Heavyweight Materials Industrial Sewing Machine Specifications: New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration Compared with elliptical feed, rectangular feed helps reduce gathered stitches With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly Well tensed seams are consistently produced without pitch errors With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses Stitch length can be easily selected by the stitch dial Many improved features offer enhanced operability such as an easy to Observe area around the needle, placement of bobbin winder on the front face, and a large hand wheel Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter Full open type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head Alternating vertical movement mechanism prevents irregular stitches High 16 mm presser foot lift enables easy material handling Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage Pressing the reset button will immediately return the machine back to the normal state Maximum stitch length: 9 mm Needle bar stroke: 36 mm Alternating vertical movement: 2.5 mm - 6.5 mm Thread take-up: slide type Hook: Vertical-axis, double-capacity hook Needle: 135 x 17 Nm 160 Thread: #30 #5, B46 B138 US Warranty: 90 Days labor on defects in materials and workmanship. Non-US Warranty: 30 days parts and labor Availability: Yes Condition: New in Box Shipping: This item usually leaves warehouses 2-3 days Returns: See Our Store Policy Add to Cart Our Price$2,950.00 |
